GSH Wire position transducer (hall effect)



  • Linear transducer with contactless Hall effect measurement technology.
  • Excellent repeatability, high IP rating, resistance to shock and vibrations, and high electromagnetic compatibility make this transducer suitable for mobile hydraulic applications.
  • Developed to guarantee a robust, high-performance solution for applications such as agricultural vehicles, earth-moving machines, and hoisting equipment.
  • Its compact dimensions (only 65mm in height) make it the ideal product to be incorporated into the crossbars of the stabilization legs of vehicles.


  • Measurement Range
    Stroke 1.800mm – 2.300mm – 3.300mm – 4.300mm – 4.800mm – 5.300mm – 6.300mm – 7.300mm – 8.000mm – 8.300mm (for lower or middle strokes please refer to the dedicated ZERO/SPAN manual)
  • Supply voltage
    +10..36 Vdc (other output – see output signal for right supply voltage)
  • Electrical connections
    M12 connector output
  • Resolution
    Virtually infinite for potentiometric – voltage divider- output; analog output 0.5…4.5V, 0…10V, 4…20mA 12 bit; CANopen output 14 bit
  • Linearity
    ± 0.25% FS (1800mm to 4300mm); ± 0.5% FS (4800mm to 8300mm)
  • Repeatability
    < ±3% FS (for 1.800mm, 2.300mm, 3.300 mm) longer lengths < ±2% FS
  • Working temperature
  • Vibrations
    20g between 10 Hz … 2000 Hz according to IEC 60068-2-6
  • Shock
    Pulse on 3 axes; 50g 11 ms according to IEC 60068-2-27
    Electromagnetic compatibility
    2014/30/EU Electromagnetic Compatibility (EMC)
  • Life
    500.000 max speed 1m/s acc. max 0.5g; 250.000 max speed 2 m/s acc. max 1g; typical speed 1m/s, typical acceleration 1g
  • IP Protection Level
    IP67 with a female mating connector (see accessories)
  • Constructive material of transducer body and wire
    Transducer: PBT
    Wire: AISI316 stainless steel, Ø0.85mm nylon coating