GRN Hall-effect single-turn rotary sensor without shaft

Rotary sensor for measurement ranges up to 360° with ability to program analogue versions of ±15° steps.
Contactless Hall technology for almost infinite sensor life due to the absence of wear on the sensing element.
Various configurations make the product easy to install on vehicles.
High IP protection level, resistance to shock and vibration, and high electromagnetic compatibility make these products suitable for many mobile hydraulics applications.
Developed to ensure a robust and high-performance solution for applications such as agricultural machines, construction machines, and material handling equipment.

Measurement range
±180° – different values on request programmable in steps of ±15° (ONLY for analogue versions)
Supply voltage
+5Vdc (only for 0.5..4.5Vdc output); +9…+36Vdc (see output signal for right supply voltage)
Output signal
0.5…4.5V RATIOMETRIC (supply +5Vdc); 0.5…4.5V; 0…10V; 4…20mA; CANopen, SAE J1939
Electrical connections
AMP Superseal 6P 282108-1; cable output 18 AWG 1.65mm OD
Resolution and speed of rotation
12 bit (analog output); 14 bit (CANopen/SAE J1939 output); 120 rpm max.
Linearity
< ±0.5%FS
Working and coefficient temperature
-40°C … +85°C (higher values on request); thermal drift < 50 ppm/°C
Vibrations
20g – 10 Hz … 2000 Hz IEC 60068-2-6
Shock
Impulsive on 3 axes; 50g 11 ms IEC 60068-2-27
Electromagnetic compatibility
2014/30/EU Electromagnetic Compatibility (EMC)
Life
Virtually no wear through the use of a permanent external magnet
IP Protection level
IP67 – IPX9K with a female mating connector mounted AMP282090-1 (GRN-A version) and IP68 (GRN-F version)
Housing material
PBT