Excel Mold Cleaner Plus Degreaser DAC-205

  • Most Aggressive Degreaser We Have
  • Best Choice for Environments with No Chloride Restrictions
  • Controlled Evaporation, in Hot & Cold Molds
  • Dries Residue Free
  • Ion Disbursement Capabilities
  • All Position Spray Tip
  • USDA Accepted

Where hot and cold molds are a concern, Excel Mold Cleaner Plus Degreaser is a chlorinated solvent that is safe from toxic fumes and is non-flammable. Excel’s high solvent structure will help in removal of plastics, oils and greases from mold surfaces. By using the all position spray tip, you get maximum performance at minimum cost.

 

Excel is also Available in Bulk:

55 gal. drums.

 

 

Excel Mold Cleaner and Degreaser will give you instant results upon application. The immediate cleaning capabilities are shown above.

This ion based degreaser pulls oils to the surface of metal and instantly disperses them through controlled evaporation.

A completely clean metal surface with no residue to wipe away is achieved with Excel.

No worry of penetrating into the slides, cams or ejector pins. No chance of oil droplets or oil marks on molded parts with Excel Mold Cleaner and Degreaser.

Another degreaser out on the market shows, above, the problems molders encounter with ineffective degreasers:

The pooled degreaser was not able to remove the oils.

Wiping away the pooled areas smears the oils back into the fine pores of the metal surface.

This surface is not cleaned, and is not beneficial to molding. Pooled up degreaser and oils are going to penetrate back into slides, cams and ejector pins. Lubrication will break down. This will lead to bleeding, premature tool failure, oil droplets and oil marks.

Download PDF for this product