Universal II All Purpose Degreaser DAC-353
- Similar to DAC-103 Universal, Except with a Wetter, Stronger Spray and Lower Flammability Characteristics
- Good on Large Cavity Molds for Easier Flushing
- Effective for Removal of Body Oils
- All Position Spray Tip
- USDA Accepted
Universal II All Purpose Degreaser has unique ion disbursement capabilities, providing rapid cleaning and degreasing. Universal II removes of body oils and fingerprints, allowing superior application of plating agents and lubricants. The all position spray tip and pinpoint action provide versatility and precise spray for those hard to get to areas.
|Excel Mold Cleaner and Degreaser will give you instant results upon application. The immediate cleaning capabilities are shown above.
This ion based degreaser pulls oils to the surface of metal and instantly disperses them through controlled evaporation.
A completely clean metal surface with no residue to wipe away is achieved with Excel.
No worry of penetrating into the slides, cams or ejector pins. No chance of oil droplets or oil marks on molded parts with Excel Mold Cleaner and Degreaser.
|Another degreaser out on the market shows, above, the problems molders encounter with ineffective degreasers:
The pooled degreaser was not able to remove the oils.
Wiping away the pooled areas smears the oils back into the fine pores of the metal surface.
This surface is not cleaned, and is not beneficial to molding. Pooled up degreaser and oils are going to penetrate back into slides, cams and ejector pins. Lubrication will break down. This will lead to bleeding, premature tool failure, oil droplets and oil marks.