M Series (Mercury-filled)

 

M3 Melt pressure transducers – mV / V output

  • Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • Strain gage Wheatstone bridge
  • Accuracy ±0.25% FSO (H); ±0.5% FSO (M)
  • Internally generated 80% calibration signal (R-Cal)
  • Fluid-filled system for temperature stability
  • Fully interchangeable with all existing brands
  • Grade of protection: IP65 (6-pin connector version)
  • 1/2-20 UNF, M18x1.5 standard threads; other types available on request
  • Standard diaphragm is 15-5 PH stainless steel with Armoloy coating
  • 17-7 PH corrugated diaphragm with TiN coating (Titanium Nitride) for ranges below 100 bar-1500 psi
  • Other diaphragms available on request

ME Melt pressure transmitters – 4…20mA output

 

  • Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • Strain gage Wheatstone bridge
  • Accuracy : ±0.25% FSO (H); ±0.5% FSO (M)
  • Internally generated 80% calibration signal (R-Cal)
  • Fluid-filled system for temperature stability
  • Fully interchangeable with all existing brands
  • Grade of protection: IP65 (6-pin connector version)
  • 1/2-20 UNF, M18x1.5 standard threads; other types available on request
  • Standard diaphragm is 15-5 PH stainless steel with Armoloy coating
  • 17-7 PH corrugated diaphragm with TiN coating (Titanium Nitride) for ranges below 100 bar-1500 psi
  • Other diaphragms available on request

 

MN Melt pressure transmitters – Voltage output

 

  • Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • Strain gage Wheatstone bridge
  • Accuracy : ±0.25% FSO (H); ±0.5% FSO (M)
  • Internally generated 80% calibration signal (R-Cal)
  • Fluid-filled system for temperature stability
  • Fully interchangeable with all existing brands
  • Grade of protection: IP65
  • 1/2-20 UNF, M18x1.5 standard threads; other types available on request
  • Standard diaphragm is 15-5 PH stainless steel with Armoloy coating
  • 17-7 PH corrugated diaphragm with TiN coating (Titanium Nitride) for ranges below 100 bar-1500 psi
  • Other diaphragms available on request

 

MX Melt pressure transmitters for applications in potentially explosive atmospheres

 

  • Pressure ranges: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • Extensimetric measurement principle with Wheatstone bridge
  • Precision: ±0.25% FSO (H); ±0.5% FSO (M)
  • Calibration signal 80% FSO internally generated
  • Completely interchangeable with all existing products
  • Protection level: IP65 (6-pin connector)
  • Standard threading 1/2-20 UNF, M18x1.5, other versions on request
  • Stainless steel diaphragm 15-5 PH with armoloy coating
  • For ranges below 100 bar-1500 psi:17-7 PH corrugated stainless steel diaphragm with TiN (Titanium Nitride) coating
  • Other diaphragm types available on request

 

MD Melt pressure transducers – DP404 CAN OPEN digital output

 

  • Digital output signal with DP404 CAN OPEN communication protocol
  • Transmission frequency (Baud rate): 10 Kbaud to 1 Mbaud (default 500 Kbaud)
  • Software / Hardware selection of Baud rate and ID nodes
  • Operation with 1 or 2 settable alarm limits
  • “Autozero” for temperature compensation
  • Zero and span drift compensation
  • 80% FSO calibration signal
  • Pressure ranges: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • Extensimetric measurement principle with Wheatstone jumper
  • Precision: ± 0.25% FSO (H); ±0.5% FSO (M)
  • Hydraulic transmission system to guarantee temperature stability.
  • Protection level: IP65
  • Standard threading: 1/2-20 UNF, M18x1.5; other versions on request
  • Stainless steel 15-5 PH diaphragm with Armoloy coating
  • For ranges below 100 bar – 1500 psi: stainless steel 17-7 PH corrugated diaphragm with TiN (titanium nitride) coating
  • Other types of diaphragm on request

 

MJ Injection melt pressure sensor Output 0-10V or CANopen

 

  • Pressure ranges of 1500 bar, 2000 bar and 2500 bar for dynamic applications
  • Accuracy 0.25%
  • Fluid filled system for temperature stability
  • Small 6mm diameter contact sensing diaphragm and M10x1.0 mm thread for mounting into small diameter nozzle applications
  • Contact diaphragm made from 17-7 PH stainless steel and coated with Titanium Aluminum Nitride
  • Small electronics housing and flex diameter for easy installation into space restricted areas
  • Reliable metal film strain gages bonded to a 15-5 PH stainless steel sensing element
  • Remote electronics
  • Available outputs are 0-10V and CAN Open output (DP404)
  • Patent pending design

 

MX4 Flange stem mount melt pressure transmitters for applications in potentially explosive atmospheres

 

  • Pressure ranges: 0-25 to 0-2000bar / 0-360 to 0-30000psi
  • Extensimetric measurement principle with Wheatstone bridge
  • Precision: ±0.25% FSO (H); ±0.5% FSO (M)
  • Calibration signal 80% FSO internally generated
  • Completely interchangeable with all existing products
  • Protection level: IP65 (6-pin connector)
  • Flange Mounting
  • Stainless steel diaphragm 15-5 PH with armoloy coating
  • For ranges below 100bar-1500psi: 17-7 PH corrugated stainless steel diaphragm with TiN (Titanium Nitride) coating
  • Other diaphragm types available on request MX4 MX4t

 

M5 Mechanical Melt Pressure Gauge

 

  • Economically priced
  • 1.5 times overload capacity
  • Easy-to-read display
  • 1/2-20 UNF thread standard, M18 x 1.5 also available
  • 15-5 PH stainless steel diaphragm with Armoloy coating standard (others available on request)
  • No power required

 

M6 Digital Melt Pressure Gauge – 4-20 mA Retransmission

 

  • Better than ±0.50% accuracy
  • Economically priced
  • 2 times overload capacity
  • 1/2-20 UNF thread standard, M18x1.5 also available
  • One alarm standard
  • 4-20 mA retransmission standard
  • 15-5 stainless steel diaphragm with Armoloy coatingstandard (others available upon request)
  • 17-7 PH corrugated diaphragm with TiN (TitaniumNitride) coating for ranges below 100 bar (1500 psi)

 

MFx Explosionproof Melt Pressure Transmitter – 2-wire 4-20 mA

 

  • Factory Mutual approved Explosionproof for Class I, Division 1, Groups A, B, C, D, and Dust-Ignitionproof for Class II, Division 1, Groups E, F, G
  • Other approvals: CE, NEMA 4/IP65
  • High-level output 2-wire, 4-20 mA
  • Accuracy: ±0.25% FSO (H); ±0.5% FSO (M)
  • Internally generated 80% calibration signal (R-Cal)
  • 1/2-20 UNF thread standard, M18x1.5 also available
  • Fluid-filled system for temperature stability
  • 15-5 PH stainless steel diaphragm with Armoloy coatingstandard (others available on request)
  • 17-7 PH corrugated diaphragm with TiN (TitaniumNitride) coating for ranges below 100 bar (1500 psi)