W Series (Oil-filled)

W3 Oil-filled melt pressure transducers – mV / V output

Pressure ranges from: 0-35 to 0-1000 bar / 0-500 to 0-15000 psi Strain gage Wheatstone bridge Accuracy : <+/-0.25% FSO (H); <+/-0.5% FSO (M) Internally generated 80% calibration signal (R-Cal) Fluid-filled system for temperature stability Oil filling meets FDA requirements CFR 178.3620 and CFR 172.878 Fully interchangeable with all existing brands Grade of protection: IP65 (6-pin connector version) 1/2-20 UNF, M18x1.5 standard threads; other types available on request Standard diaphragm is a 17-7 PH stainless steel TiN (Titanium Nitride) coated corrugated diaphragm

WE Oil-filled melt pressure transmitters – 4…20mA output

Pressure ranges from: 0-35 to 0-1000 bar / 0-500 to 0-15000 psi Strain gage Wheatstone bridge Accuracy : <+/-0.25% FSO (H); <+/-0.5% FSO (M) Internally generated 80% calibration signal (R-Cal) Fluid-filled system for temperature stability Oil filling meets FDA requirements CFR 178.3620 and CFR 172.878 Fully interchangeable with all existing brands Grade of protection: IP65 (6-pin connector version) 1/2-20 UNF, M18x1.5 standard threads; other types available on request Standard diaphragm is a 17-7 PH stainless steel TiN (Titanium Nitride) coated corrugated diaphragm

WN Oil-filled melt pressure transmitters – Voltage output

Pressure ranges from: 0-35 to 0-1000 bar / 0-500 to 0-15000 psi Strain gage Wheatstone bridge Accuracy : <+/-0.25% FSO (H); <+/-0.5% FSO (M) Internally generated 80% calibration signal (R-Cal) Fluid-filled system for temperature stability Oil filling meets FDA requirements CFR 178.3620 and CFR 172.878 Fully interchangeable with all existing brands Grade of protection: IP65 (6-pin connector version) 1/2-20 UNF, M18x1.5 standard threads; other types available on request Standard diaphragm is a 17-7 PH stainless steel TiN (Titanium Nitride) coated corrugated diaphragm

WD Oil-filled melt pressure transducers – DP404 CAN OPEN digital output

Digital output signal with DP404 CAN OPEN communication protocol Transmission frequency (Baud rate): 10 Kbaud to 1 Mbaud (default 500 Kbaud) Software / Hardware selection of Baud rate and ID nodes Operation with 1 or 2 settable alarm limits “Autozero” for temperature compensation Zero and span drift compensation 80% FSO calibration signal Pressure ranges: 0-35 to 0-2000 bar / 0-500 to 0-15000 psi Extensimetric measurement principle with Wheatstone jumper Precision: < +/- 0.25% FSO (H); < +/-0.5% FSO (M) Hydraulic transmission system to guarantee temperature stability. Protection level: IP65 Standard threading: 1/2-20 UNF, M18x1.5; other versions on request Stainless steel 17-7 PH diaphragm with TiN (titanium nitride) coating Other types of diaphragm on request

WX Oil-filled Melt pressure transmitters for applications in potentially explosive atmospheres

Pressure ranges: 0-35 to 0-1000 bar / 0-500 to 0-15000 psi Extensimetric measurement principle with Wheatstone bridge Precision: <+/-0.25% FSO (H); <+/-0.5% FSO (M) Calibration signal 80% FSO internally generated Filled with FDA-approved oil CFR 178.3620 and CFR 178.878 Completely interchangeable with all existing products Protection level: IP65 (6-pin connector) Standard threading 1/2-20 UNF, M18x1.5, other versions on request 17-7 PH stainless steel diaphragm with TiN (Titanium Nitride) coating

W6 Series – Digital Melt Pressure Gauge (Oil-filled) – 4-20 mA Retransmission

Better than +/-0.50% accuracy Economically priced 2 times overload capacity (ranges < 700 bar [10000 psi]) 1/2-20 UNF thread standard, M18x1.5 also available One alarm standard 4-20 mA retransmission standard 17-7 PH corrugated diaphragm with TiN (Titanium Nitride) coating standard Oil-fill is FDA approved meets requirements CFR172.3620 and CFR172.878

WFx Explosionproof Melt Pressure Transmitter (Oil-filled) – 2-wire 4-20 mA

Factory Mutual approved Explosionproof for Class I, Division 1, Groups A, B, C, D, and Dust-Ignitionproof for Class II, Division 1, Groups E, F, G Other approvals: CE, NEMA 4/IP65 High-level output 2-wire, 4-20 mA Accuracy: <+/-0.25% FSO (H); <+/-0.5% FSO (M) Internally generated 80% calibration signal (R-Cal) 1/2-20 UNF thread standard, M18x1.5 also available Fluid-filled system for temperature stability 17-7 PH corrugated diaphragm with TiN (Titanium Nitride) coating standard Oil-fill is FDA approved meets requirements CFR172.3620 and 172.878